Skip to main content

Platform Transaction Format

This file is meant to be the single source of truth for how we serialize transactions in the Platform Chain or P-Chain. This document uses the primitive serialization format for packing and secp256k1 for cryptographic user identification.

Codec ID

Some data is prepended with a codec ID (unt16) that denotes how the data should be deserialized. Right now, the only valid codec ID is 0 (0x00 0x00).

Transferable Output

Transferable outputs wrap an output with an asset ID.

What Transferable Output Contains

A transferable output contains an AssetID and an Output.

  • AssetID is a 32-byte array that defines which asset this output references. The only valid AssetID is the CAM AssetID.
  • Output is an output, as defined below. For example, this can be a SECP256K1 transfer output.

Gantt Transferable Output Specification

+----------+----------+-------------------------+
| asset_id : [32]byte | 32 bytes |
+----------+----------+-------------------------+
| output : Output | size(output) bytes |
+----------+----------+-------------------------+
| 32 + size(output) bytes |
+-------------------------+

Proto Transferable Output Specification

message TransferableOutput {
bytes asset_id = 1; // 32 bytes
Output output = 2; // size(output)
}

Transferable Output Example

Let’s make a transferable output:

  • AssetID: 0x6870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a
  • Output: "Example SECP256K1 Transfer Output from below"
[
AssetID <- 0x6870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a,
Output <- 0x0000000700000000ee5be5c000000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715c,
]
=
[
// assetID:
0x68, 0x70, 0xb7, 0xd6, 0x6a, 0xc3, 0x25, 0x40,
0x31, 0x13, 0x79, 0xe5, 0xb5, 0xdb, 0xad, 0x28,
0xec, 0x7e, 0xb8, 0xdd, 0xbf, 0xc8, 0xf4, 0xd6,
0x72, 0x99, 0xeb, 0xb4, 0x84, 0x75, 0x90, 0x7a,
// output:
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
0xee, 0x5b, 0xe5, 0xc0, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x01, 0xda, 0x2b, 0xee, 0x01,
0xbe, 0x82, 0xec, 0xc0, 0x0c, 0x34, 0xf3, 0x61,
0xed, 0xa8, 0xeb, 0x30, 0xfb, 0x5a, 0x71, 0x5c,
]

Transferable Input

Transferable inputs describe a specific UTXO with a provided transfer input.

What Transferable Input Contains

A transferable input contains a TxID, UTXOIndex AssetID and an Input.

  • TxID is a 32-byte array that defines which transaction this input is consuming an output from.
  • UTXOIndex is an int that defines which utxo this input is consuming the specified transaction.
  • AssetID is a 32-byte array that defines which asset this input references. The only valid AssetID is the CAM AssetID.
  • Input is a transferable input object.

Gantt Transferable Input Specification

+------------+----------+------------------------+
| tx_id : [32]byte | 32 bytes |
+------------+----------+------------------------+
| utxo_index : int | 04 bytes |
+------------+----------+------------------------+
| asset_id : [32]byte | 32 bytes |
+------------+----------+------------------------+
| input : Input | size(input) bytes |
+------------+----------+------------------------+
| 68 + size(input) bytes |
+------------------------+

Proto Transferable Input Specification

message TransferableInput {
bytes tx_id = 1; // 32 bytes
uint32 utxo_index = 2; // 04 bytes
bytes asset_id = 3; // 32 bytes
Input input = 4; // size(input)
}

Transferable Input Example

Let’s make a transferable input:

  • TxID: 0x0dfafbdf5c81f635c9257824ff21c8e3e6f7b632ac306e11446ee540d34711a15
  • UTXOIndex: 0
  • AssetID: 0x6870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a
  • Input: "Example SECP256K1 Transfer Input from below"
[
TxID <- 0x0dfafbdf5c81f635c9257824ff21c8e3e6f7b632ac306e11446ee540d34711a15
UTXOIndex <- 0x00000001
AssetID <- 0x6870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a
Input <- 0x0000000500000000ee6b28000000000100000000
]
=
[
// txID:
0xdf, 0xaf, 0xbd, 0xf5, 0xc8, 0x1f, 0x63, 0x5c,
0x92, 0x57, 0x82, 0x4f, 0xf2, 0x1c, 0x8e, 0x3e,
0x6f, 0x7b, 0x63, 0x2a, 0xc3, 0x06, 0xe1, 0x14,
0x46, 0xee, 0x54, 0x0d, 0x34, 0x71, 0x1a, 0x15,
// utxoIndex:
0x00, 0x00, 0x00, 0x01,
// assetID:
0x68, 0x70, 0xb7, 0xd6, 0x6a, 0xc3, 0x25, 0x40,
0x31, 0x13, 0x79, 0xe5, 0xb5, 0xdb, 0xad, 0x28,
0xec, 0x7e, 0xb8, 0xdd, 0xbf, 0xc8, 0xf4, 0xd6,
0x72, 0x99, 0xeb, 0xb4, 0x84, 0x75, 0x90, 0x7a,
// input:
0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
0xee, 0x6b, 0x28, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00
]

Outputs

Outputs have two possible type: SECP256K1TransferOutput, SECP256K1OutputOwners.

SECP256K1 Transfer Output

A secp256k1 transfer output allows for sending a quantity of an asset to a collection of addresses after a specified unix time. The only valid asset is CAM.

What SECP256K1 Transfer Output Contains

A secp256k1 transfer output contains a TypeID, Amount, Locktime, Threshold, and Addresses.

  • TypeID is the ID for this output type. It is 0x00000007.
  • Amount is a long that specifies the quantity of the asset that this output owns. Must be positive.
  • Locktime is a long that contains the unix timestamp that this output can be spent after. The unix timestamp is specific to the second.
  • Threshold is an int that names the number of unique signatures required to spend the output. Must be less than or equal to the length of Addresses. If Addresses is empty, must be 0.
  • Addresses is a list of unique addresses that correspond to the private keys that can be used to spend this output. Addresses must be sorted lexicographically.

Gantt SECP256K1 Transfer Output Specification

+-----------+------------+--------------------------------+
| type_id : int | 4 bytes |
+-----------+------------+--------------------------------+
| amount : long | 8 bytes |
+-----------+------------+--------------------------------+
| locktime : long | 8 bytes |
+-----------+------------+--------------------------------+
| threshold : int | 4 bytes |
+-----------+------------+--------------------------------+
| addresses : [][20]byte | 4 + 20 * len(addresses) bytes |
+-----------+------------+--------------------------------+
| 28 + 20 * len(addresses) bytes |
+--------------------------------+

Proto SECP256K1 Transfer Output Specification

message SECP256K1TransferOutput {
uint32 type_id = 1; // 04 bytes
uint64 amount = 2; // 08 bytes
uint64 locktime = 3; // 08 bytes
uint32 threshold = 4; // 04 bytes
repeated bytes addresses = 5; // 04 bytes + 20 bytes * len(addresses)
}

SECP256K1 Transfer Output Example

Let’s make a secp256k1 transfer output with:

  • TypeID: 7
  • Amount: 3999000000
  • Locktime: 0
  • Threshold: 1
  • Addresses:
    • 0xda2bee01be82ecc00c34f361eda8eb30fb5a715c
[
TypeID <- 0x00000007
Amount <- 0x00000000ee5be5c0
Locktime <- 0x0000000000000000
Threshold <- 0x00000001
Addresses <- [
0xda2bee01be82ecc00c34f361eda8eb30fb5a715c,
]
]
=
[
// type_id:
0x00, 0x00, 0x00, 0x07,
// amount:
0x00, 0x00, 0x00, 0x00, 0xee, 0x5b, 0xe5, 0xc0,
// locktime:
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// threshold:
0x00, 0x00, 0x00, 0x01,
// number of addresses:
0x00, 0x00, 0x00, 0x01,
// addrs[0]:
0xda, 0x2b, 0xee, 0x01, 0xbe, 0x82, 0xec, 0xc0,
0x0c, 0x34, 0xf3, 0x61, 0xed, 0xa8, 0xeb, 0x30,
0xfb, 0x5a, 0x71, 0x5c,
]

SECP256K1 Output Owners Output

A secp256k1 output owners output will receive the staking rewards when the lock up period ends.

What SECP256K1 Output Owners Output Contains

A secp256k1 output owners output contains a TypeID, Locktime, Threshold, and Addresses.

  • TypeID is the ID for this output type. It is 0x0000000b.
  • Locktime is a long that contains the unix timestamp that this output can be spent after. The unix timestamp is specific to the second.
  • Threshold is an int that names the number of unique signatures required to spend the output. Must be less than or equal to the length of Addresses. If Addresses is empty, must be 0.
  • Addresses is a list of unique addresses that correspond to the private keys that can be used to spend this output. Addresses must be sorted lexicographically.

Gantt SECP256K1 Output Owners Output Specification

+-----------+------------+--------------------------------+
| type_id : int | 4 bytes |
+-----------+------------+--------------------------------+
| locktime : long | 8 bytes |
+-----------+------------+--------------------------------+
| threshold : int | 4 bytes |
+-----------+------------+--------------------------------+
| addresses : [][20]byte | 4 + 20 * len(addresses) bytes |
+-----------+------------+--------------------------------+
| 20 + 20 * len(addresses) bytes |
+--------------------------------+

Proto SECP256K1 Output Owners Output Specification

message SECP256K1OutputOwnersOutput {
uint32 type_id = 1; // 04 bytes
uint64 locktime = 2; // 08 bytes
uint32 threshold = 3; // 04 bytes
repeated bytes addresses = 4; // 04 bytes + 20 bytes * len(addresses)
}

SECP256K1 Output Owners Output Example

Let’s make a secp256k1 output owners output with:

  • TypeID: 11
  • Locktime: 0
  • Threshold: 1
  • Addresses:
    • 0xda2bee01be82ecc00c34f361eda8eb30fb5a715c
[
TypeID <- 0x0000000b
Locktime <- 0x0000000000000000
Threshold <- 0x00000001
Addresses <- [
0xda2bee01be82ecc00c34f361eda8eb30fb5a715c,
]
]
=
[
// type_id:
0x00, 0x00, 0x00, 0x0b,
// locktime:
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// threshold:
0x00, 0x00, 0x00, 0x01,
// number of addresses:
0x00, 0x00, 0x00, 0x01,
// addrs[0]:
0xda, 0x2b, 0xee, 0x01, 0xbe, 0x82, 0xec, 0xc0,
0x0c, 0x34, 0xf3, 0x61, 0xed, 0xa8, 0xeb, 0x30,
0xfb, 0x5a, 0x71, 0x5c,
]

Inputs

Inputs have one possible type: SECP256K1TransferInput.

SECP256K1 Transfer Input

A secp256k1 transfer input allows for spending an unspent secp256k1 transfer output.

What SECP256K1 Transfer Input Contains

A secp256k1 transfer input contains an Amount and AddressIndices.

  • TypeID is the ID for this output type. It is 0x00000005.
  • Amount is a long that specifies the quantity that this input should be consuming from the UTXO. Must be positive. Must be equal to the amount specified in the UTXO.
  • AddressIndices is a list of unique ints that define the private keys are being used to spend the UTXO. Each UTXO has an array of addresses that can spend the UTXO. Each int represents the index in this address array that will sign this transaction. The array must be sorted low to high.

Gantt SECP256K1 Transfer Input Specification

+-------------------------+-------------------------------------+
| type_id : int | 4 bytes |
+-----------------+-------+-------------------------------------+
| amount : long | 8 bytes |
+-----------------+-------+-------------------------------------+
| address_indices : []int | 4 + 4 * len(address_indices) bytes |
+-----------------+-------+-------------------------------------+
| 16 + 4 * len(address_indices) bytes |
+-------------------------------------+

Proto SECP256K1 Transfer Input Specification

message SECP256K1TransferInput {
uint32 type_id = 1; // 04 bytes
uint64 amount = 2; // 08 bytes
repeated uint32 address_indices = 3; // 04 bytes + 4 bytes * len(address_indices)
}

SECP256K1 Transfer Input Example

Let’s make a payment input with:

  • TypeID: 5
  • Amount: 4000000000
  • AddressIndices: [0]
[
TypeID <- 0x00000005
Amount <- 0x00000000ee6b2800,
AddressIndices <- [0x00000000]
]
=
[
// type_id:
0x00, 0x00, 0x00, 0x05,
// amount:
0x00, 0x00, 0x00, 0x00, 0xee, 0x6b, 0x28, 0x00,
// length:
0x00, 0x00, 0x00, 0x01,
// address_indices[0]
0x00, 0x00, 0x00, 0x00
]

Unsigned Transactions

Unsigned transactions contain the full content of a transaction with only the signatures missing. Unsigned transactions have six possible types: AddValidatorTx, AddSubnetValidatorTx, AddDelegatorTx, CreateSubnetTx, ImportTx, and ExportTx. They embed BaseTx, which contains common fields and operations.

Unsigned BaseTx

What Base Tx Contains

A base tx contains a TypeID, NetworkID, BlockchainID, Outputs, Inputs, and Memo.

  • TypeID is the ID for this type. It is 0x00000000.
  • NetworkID is an int that defines which network this transaction is meant to be issued to. This value is meant to support transaction routing and is not designed for replay attack prevention.
  • BlockchainID is a 32-byte array that defines which blockchain this transaction was issued to. This is used for replay attack prevention for transactions that could potentially be valid across network or blockchain.
  • Outputs is an array of transferable output objects. Outputs must be sorted lexicographically by their serialized representation. The total quantity of the assets created in these outputs must be less than or equal to the total quantity of each asset consumed in the inputs minus the transaction fee.
  • Inputs is an array of transferable input objects. Inputs must be sorted and unique. Inputs are sorted first lexicographically by their TxID and then by the UTXOIndex from low to high. If there are inputs that have the same TxID and UTXOIndex, then the transaction is invalid as this would result in a double spend.
  • Memo Memo field contains arbitrary bytes, up to 256 bytes.

Gantt Base Tx Specification

+---------------+----------------------+-----------------------------------------+
| type_id : int | 4 bytes |
+---------------+----------------------+-----------------------------------------+
| network_id : int | 4 bytes |
+---------------+----------------------+-----------------------------------------+
| blockchain_id : [32]byte | 32 bytes |
+---------------+----------------------+-----------------------------------------+
| outputs : []TransferableOutput | 4 + size(outputs) bytes |
+---------------+----------------------+-----------------------------------------+
| inputs : []TransferableInput | 4 + size(inputs) bytes |
+---------------+----------------------+-----------------------------------------+
| memo : [256]byte | 4 + size(memo) bytes |
+---------------+----------------------+-----------------------------------------+
| 52 + size(outputs) + size(inputs) + size(memo) bytes |
+------------------------------------------------------+

Proto Base Tx Specification

message BaseTx {
uint32 type_id = 1; // 04 bytes
uint32 network_id = 2; // 04 bytes
bytes blockchain_id = 3; // 32 bytes
repeated Output outputs = 4; // 04 bytes + size(outs)
repeated Input inputs = 5; // 04 bytes + size(ins)
bytes memo = 6; // 04 bytes + size(memo)
}

Base Tx Example

Let’s make a base tx that uses the inputs and outputs from the previous examples:

  • TypeID: 0
  • NetworkID: 12345
  • BlockchainID: 0x000000000000000000000000000000000000000000000000000000000000000
  • Outputs:
    • "Example Transferable Output as defined above"
  • Inputs:
    • "Example Transferable Input as defined above"
[
TypeID <- 0x00000000
NetworkID <- 0x00003039
BlockchainID <- 0x000000000000000000000000000000000000000000000000000000000000000
Outputs <- [
0x6870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000700000000ee5be5c000000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715c
]
Inputs <- [
0xdfafbdf5c81f635c9257824ff21c8e3e6f7b632ac306e11446ee540d34711a15000000016870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000500000000ee6b28000000000100000000
]
]
=
[
// type_id:
0x00, 0x00, 0x00, 0x00,
// networkID:
0x00, 0x00, 0x30, 0x39,
// blockchainID:
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// number of outputs:
0x00, 0x00, 0x00, 0x01,
// transferable output:
0x68, 0x70, 0xb7, 0xd6, 0x6a, 0xc3, 0x25, 0x40,
0x31, 0x13, 0x79, 0xe5, 0xb5, 0xdb, 0xad, 0x28,
0xec, 0x7e, 0xb8, 0xdd, 0xbf, 0xc8, 0xf4, 0xd6,
0x72, 0x99, 0xeb, 0xb4, 0x84, 0x75, 0x90, 0x7a,
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
0xee, 0x5b, 0xe5, 0xc0, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x01, 0xda, 0x2b, 0xee, 0x01,
0xbe, 0x82, 0xec, 0xc0, 0x0c, 0x34, 0xf3, 0x61,
0xed, 0xa8, 0xeb, 0x30, 0xfb, 0x5a, 0x71, 0x5c,
// number of inputs:
0x00, 0x00, 0x00, 0x01,
// transferable input:
0xdf, 0xaf, 0xbd, 0xf5, 0xc8, 0x1f, 0x63, 0x5c,
0x92, 0x57, 0x82, 0x4f, 0xf2, 0x1c, 0x8e, 0x3e,
0x6f, 0x7b, 0x63, 0x2a, 0xc3, 0x06, 0xe1, 0x14,
0x46, 0xee, 0x54, 0x0d, 0x34, 0x71, 0x1a, 0x15,
0x00, 0x00, 0x00, 0x01,
0x68, 0x70, 0xb7, 0xd6, 0x6a, 0xc3, 0x25, 0x40,
0x31, 0x13, 0x79, 0xe5, 0xb5, 0xdb, 0xad, 0x28,
0xec, 0x7e, 0xb8, 0xdd, 0xbf, 0xc8, 0xf4, 0xd6,
0x72, 0x99, 0xeb, 0xb4, 0x84, 0x75, 0x90, 0x7a,
0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
0xee, 0x6b, 0x28, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00,
// Memo length:
0x00, 0x00, 0x00, 0x00,
]

Unsigned Add Validator Tx

What Unsigned Add Validator Tx Contains

An unsigned add validator tx contains a BaseTx, Validator, Stake, RewardsOwner, and Shares. The TypeID for this type is 0x0000000c.

  • BaseTx
  • Validator Validator has a NodeID, StartTime, EndTime, and Weight
    • NodeID is 20 bytes which is the node ID of the validator.
    • StartTime is a long which is the Unix time when the validator starts validating.
    • EndTime is a long which is the Unix time when the validator stops validating.
    • Weight is a long which is the amount the validator stakes
  • Stake Stake has LockedOuts
    • LockedOuts An array of Transferable Outputs that are locked for the duration of the staking period. At the end of the staking period, these outputs are refunded to their respective addresses.
  • RewardsOwner A SECP256K1OutputOwners
  • Shares 10,000 times percentage of reward taken from delegators

Gantt Unsigned Add Validator Tx Specification

+---------------+-----------------------+-----------------------------------------+
| base_tx : BaseTx | size(base_tx) bytes |
+---------------+-----------------------+-----------------------------------------+
| validator : Validator | 44 bytes |
+---------------+-----------------------+-----------------------------------------+
| stake : Stake | size(LockedOuts) bytes |
+---------------+-----------------------+-----------------------------------------+
| rewards_owner : SECP256K1OutputOwners | size(rewards_owner) bytes |
+---------------+-----------------------+-----------------------------------------+
| shares : Shares | 4 bytes |
+---------------+-----------------------+-----------------------------------------+
| 48 + size(stake) + size(rewards_owner) + size(base_tx) bytes |
+--------------------------------------------------------------+

Proto Unsigned Add Validator Tx Specification

message AddValidatorTx {
BaseTx base_tx = 1; // size(base_tx)
Validator validator = 2; // 44 bytes
Stake stake = 3; // size(LockedOuts)
SECP256K1OutputOwners rewards_owner = 4; // size(rewards_owner)
uint32 shares = 5; // 04 bytes
}

Unsigned Add Validator Tx Example

Let’s make an unsigned add validator tx that uses the inputs and outputs from the previous examples:

  • BaseTx: "Example BaseTx as defined above with ID set to 0c"

  • Validator Validator has a NodeID, StartTime, EndTime, and Weight

    • NodeID is 20 bytes which is the node ID of the validator.
    • StartTime is a long which is the Unix time when the validator starts validating.
    • EndTime is a long which is the Unix time when the validator stops validating.
    • Weight is a long which is the amount the validator stakes
  • Stake: 0x0000000139c33a499ce4c33a3b09cdd2cfa01ae70dbf2d18b2d7d168524440e55d55008800000007000001d1a94a2000000000000000000000000001000000013cb7d3842e8cee6a0ebd09f1fe884f6861e1b29c

  • RewardsOwner: 0x0000000b00000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715c

  • Shares: 0x00000064

    0x0000000b00000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715c

[
BaseTx <- 0x0000000c000030390000000000000000000000000000000000000000000000000000000000000006870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000700000000ee5be5c000000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715cdfafbdf5c81f635c9257824ff21c8e3e6f7b632ac306e11446ee540d34711a15000000016870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000500000000ee6b28000000000100000000
NodeID <- 0xe9094f73698002fd52c90819b457b9fbc866ab80
StarTime <- 0x000000005f21f31d
EndTime <- 0x000000005f497dc6
Weight <- 0x000000000000d431
Stake <- 0x0000000139c33a499ce4c33a3b09cdd2cfa01ae70dbf2d18b2d7d168524440e55d55008800000007000001d1a94a2000000000000000000000000001000000013cb7d3842e8cee6a0ebd09f1fe884f6861e1b29c
RewardsOwner <- 0x0000000b00000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715c
Shares <- 0x00000064
]
=
[
// base tx:
0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x30, 0x39,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x01, 0x68, 0x70, 0xb7, 0xd6,
0x6a, 0xc3, 0x25, 0x40, 0x31, 0x13, 0x79, 0xe5,
0xb5, 0xdb, 0xad, 0x28, 0xec, 0x7e, 0xb8, 0xdd,
0xbf, 0xc8, 0xf4, 0xd6,
0x72, 0x99, 0xeb, 0xb4, 0x84, 0x75, 0x90, 0x7a,
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
0xee, 0x5b, 0xe5, 0xc0, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x01, 0xda, 0x2b, 0xee, 0x01,
0xbe, 0x82, 0xec, 0xc0, 0x0c, 0x34, 0xf3, 0x61,
0xed, 0xa8, 0xeb, 0x30, 0xfb, 0x5a, 0x71, 0x5c,
0x00, 0x00, 0x00, 0x01,
0xdf, 0xaf, 0xbd, 0xf5, 0xc8, 0x1f, 0x63, 0x5c,
0x92, 0x57, 0x82, 0x4f, 0xf2, 0x1c, 0x8e, 0x3e,
0x6f, 0x7b, 0x63, 0x2a, 0xc3, 0x06, 0xe1, 0x14,
0x46, 0xee, 0x54, 0x0d, 0x34, 0x71, 0x1a, 0x15,
0x00, 0x00, 0x00, 0x01,
0x68, 0x70, 0xb7, 0xd6, 0x6a, 0xc3, 0x25, 0x40,
0x31, 0x13, 0x79, 0xe5, 0xb5, 0xdb, 0xad, 0x28,
0xec, 0x7e, 0xb8, 0xdd, 0xbf, 0xc8, 0xf4, 0xd6,
0x72, 0x99, 0xeb, 0xb4, 0x84, 0x75, 0x90, 0x7a,
0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
0xee, 0x6b, 0x28, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
// Node ID
0xe9, 0x09, 0x4f, 0x73, 0x69, 0x80, 0x02, 0xfd,
0x52, 0xc9, 0x08, 0x19, 0xb4, 0x57, 0xb9, 0xfb,
0xc8, 0x66, 0xab, 0x80,
// StartTime
0x00, 0x00, 0x00, 0x00, 0x5f, 0x21, 0xf3, 0x1d,
// EndTime
0x00, 0x00, 0x00, 0x00, 0x5f, 0x49, 0x7d, 0xc6,
// Weight
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
// Stake
0x00, 0x00, 0x00, 0x01, 0x39, 0xc3, 0x3a, 0x49,
0x9c, 0xe4, 0xc3, 0x3a, 0x3b, 0x09, 0xcd, 0xd2,
0xcf, 0xa0, 0x1a, 0xe7, 0x0d, 0xbf, 0x2d, 0x18,
0xb2, 0xd7, 0xd1, 0x68, 0x52, 0x44, 0x40, 0xe5,
0x5d, 0x55, 0x00, 0x88, 0x00, 0x00, 0x00, 0x07,
0x00, 0x00, 0x01, 0xd1, 0xa9, 0x4a, 0x20, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01,
0x3c, 0xb7, 0xd3, 0x84, 0x2e, 0x8c, 0xee, 0x6a,
0x0e, 0xbd, 0x09, 0xf1, 0xfe, 0x88, 0x4f, 0x68,
0x61, 0xe1, 0xb2, 0x9c,
// RewardsOwner
0x00, 0x00, 0x00, 0x0b, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x01, 0xda, 0x2b, 0xee, 0x01,
0xbe, 0x82, 0xec, 0xc0, 0x0c, 0x34, 0xf3, 0x61,
0xed, 0xa8, 0xeb, 0x30, 0xfb, 0x5a, 0x71, 0x5c,
// Shares
0x00, 0x00, 0x00, 0x64,
]

Unsigned Add Subnet Validator Tx

What Unsigned Add Subnet Validator Tx Contains

An unsigned add subnet validator tx contains a BaseTx, Validator, SubnetID, and SubnetAuth. The TypeID for this type is 0x0000000d.

  • BaseTx
  • Validator Validator has a NodeID, StartTime, EndTime, and Weight
    • NodeID is 20 bytes which is the node ID of the validator.
    • StartTime is a long which is the Unix time when the validator starts validating.
    • EndTime is a long which is the Unix time when the validator stops validating.
    • Weight is a long which is the amount the validator stakes
  • SubnetID a 32 byte subnet id
  • SubnetAuth contains SigIndices and has a type id of 0x0000000a. SigIndices is a list of unique ints that define the addresses signing the control signature to add a validator to a subnet. The array must be sorted low to high.

Gantt Unsigned Add Subnet Validator Tx Specification

+---------------+----------------------+-----------------------------------------+
| base_tx : BaseTx | size(base_tx) bytes |
+---------------+----------------------+-----------------------------------------+
| validator : Validator | 44 bytes |
+---------------+----------------------+-----------------------------------------+
| subnet_id : [32]byte | 32 bytes |
+---------------+----------------------+-----------------------------------------+
| subnet_auth : SubnetAuth | 4 bytes + len(sig_indices) bytes |
+---------------+----------------------+-----------------------------------------+
| 80 + len(sig_indices) + size(base_tx) bytes |
+---------------------------------------------+

Proto Unsigned Add Subnet Validator Tx Specification

message AddSubnetValidatorTx {
BaseTx base_tx = 1; // size(base_tx)
Validator validator = 2; // size(validator)
SubnetID subnet_id = 3; // 32 bytes
SubnetAuth subnet_auth = 4; // 04 bytes + len(sig_indices)
}

Unsigned Add Subnet Validator Tx Example

Let’s make an unsigned add subnet validator tx that uses the inputs and outputs from the previous examples:

  • BaseTx: "Example BaseTx as defined above with ID set to 0d"
  • NodeID: 0xe9094f73698002fd52c90819b457b9fbc866ab80
  • StarTime: 0x000000005f21f31d
  • EndTime: 0x000000005f497dc6
  • Weight: 0x000000000000d431
  • SubnetID: 0x58b1092871db85bc752742054e2e8be0adf8166ec1f0f0769f4779f14c71d7eb
  • SubnetAuth:
    • TypeID: 0x0000000a
    • SigIndices: 0x00000000
[
BaseTx <- 0x0000000d000030390000000000000000000000000000000000000000000000000000000000000006870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000700000000ee5be5c000000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715cdfafbdf5c81f635c9257824ff21c8e3e6f7b632ac306e11446ee540d34711a15000000016870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000500000000ee6b28000000000100000000
NodeID <- 0xe9094f73698002fd52c90819b457b9fbc866ab80
StarTime <- 0x000000005f21f31d
EndTime <- 0x000000005f497dc6
Weight <- 0x000000000000d431
SubnetID <- 0x58b1092871db85bc752742054e2e8be0adf8166ec1f0f0769f4779f14c71d7eb
SubnetAuth TypeID <- 0x0000000a
SubnetAuth <- 0x00000000
]
=
[
// base tx:
0x00, 0x00, 0x00, 0x0d,
0x00, 0x00, 0x30, 0x39,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x01,
0x68, 0x70, 0xb7, 0xd6, 0x6a, 0xc3, 0x25, 0x40,
0x31, 0x13, 0x79, 0xe5, 0xb5, 0xdb, 0xad, 0x28,
0xec, 0x7e, 0xb8, 0xdd, 0xbf, 0xc8, 0xf4, 0xd6,
0x72, 0x99, 0xeb, 0xb4, 0x84, 0x75, 0x90, 0x7a,
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
0xee, 0x5b, 0xe5, 0xc0, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x01, 0xda, 0x2b, 0xee, 0x01,
0xbe, 0x82, 0xec, 0xc0, 0x0c, 0x34, 0xf3, 0x61,
0xed, 0xa8, 0xeb, 0x30, 0xfb, 0x5a, 0x71, 0x5c,
0x00, 0x00, 0x00, 0x01,
0xdf, 0xaf, 0xbd, 0xf5, 0xc8, 0x1f, 0x63, 0x5c,
0x92, 0x57, 0x82, 0x4f, 0xf2, 0x1c, 0x8e, 0x3e,
0x6f, 0x7b, 0x63, 0x2a, 0xc3, 0x06, 0xe1, 0x14,
0x46, 0xee, 0x54, 0x0d, 0x34, 0x71, 0x1a, 0x15,
0x00, 0x00, 0x00, 0x01,
0x68, 0x70, 0xb7, 0xd6, 0x6a, 0xc3, 0x25, 0x40,
0x31, 0x13, 0x79, 0xe5, 0xb5, 0xdb, 0xad, 0x28,
0xec, 0x7e, 0xb8, 0xdd, 0xbf, 0xc8, 0xf4, 0xd6,
0x72, 0x99, 0xeb, 0xb4, 0x84, 0x75, 0x90, 0x7a,
0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
0xee, 0x6b, 0x28, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
// Node ID
0xe9, 0x09, 0x4f, 0x73, 0x69, 0x80, 0x02, 0xfd,
0x52, 0xc9, 0x08, 0x19, 0xb4, 0x57, 0xb9, 0xfb,
0xc8, 0x66, 0xab, 0x80,
// StartTime
0x00, 0x00, 0x00, 0x00, 0x5f, 0x21, 0xf3, 0x1d,
// EndTime
0x00, 0x00, 0x00, 0x00, 0x5f, 0x49, 0x7d, 0xc6,
// Weight
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
// SubnetID
0x58, 0xb1, 0x09, 0x28, 0x71, 0xdb, 0x85, 0xbc,
0x75, 0x27, 0x42, 0x05, 0x4e, 0x2e, 0x8b, 0xe0,
0xad, 0xf8, 0x16, 0x6e, 0xc1, 0xf0, 0xf0, 0x76,
0x9f, 0x47, 0x79, 0xf1, 0x4c, 0x71, 0xd7, 0xeb,
// SubnetAuth
// SubnetAuth TypeID
0x00, 0x00, 0x00, 0x0a,
// SigIndices length
0x00, 0x00, 0x00, 0x01,
// SigIndices
0x00, 0x00, 0x00, 0x00,
]

Unsigned Add Delegator Tx

What Unsigned Add Delegator Tx Contains

An unsigned add delegator tx contains a BaseTx, Validator, Stake, and RewardsOwner. The TypeID for this type is 0x0000000e.

  • BaseTx
  • Validator Validator has a NodeID, StartTime, EndTime, and Weight
    • NodeID is 20 bytes which is the node ID of the delegatee.
    • StartTime is a long which is the Unix time when the delegator starts delegating.
    • EndTime is a long which is the Unix time when the delegator stops delegating (and staked CAM is returned).
    • Weight is a long which is the amount the delegator stakes
  • Stake Stake has LockedOuts
    • LockedOuts An array of Transferable Outputs that are locked for the duration of the staking period. At the end of the staking period, these outputs are refunded to their respective addresses.
  • RewardsOwner An SECP256K1OutputOwners

Gantt Unsigned Add Delegator Tx Specification

+---------------+-----------------------+-----------------------------------------+
| base_tx : BaseTx | size(base_tx) bytes |
+---------------+-----------------------+-----------------------------------------+
| validator : Validator | 44 bytes |
+---------------+-----------------------+-----------------------------------------+
| stake : Stake | size(LockedOuts) bytes |
+---------------+-----------------------+-----------------------------------------+
| rewards_owner : SECP256K1OutputOwners | size(rewards_owner) bytes |
+---------------+-----------------------+-----------------------------------------+
| 44 + size(stake) + size(rewards_owner) + size(base_tx) bytes |
+--------------------------------------------------------------+

Proto Unsigned Add Delegator Tx Specification

message AddDelegatorTx {
BaseTx base_tx = 1; // size(base_tx)
Validator validator = 2; // 44 bytes
Stake stake = 3; // size(LockedOuts)
SECP256K1OutputOwners rewards_owner = 4; // size(rewards_owner)
}

Unsigned Add Delegator Tx Example

Let’s make an unsigned add delegator tx that uses the inputs and outputs from the previous examples:

  • BaseTx: "Example BaseTx as defined above with ID set to 0e"
  • NodeID: 0xe9094f73698002fd52c90819b457b9fbc866ab80
  • StarTime: 0x000000005f21f31d
  • EndTime: 0x000000005f497dc6
  • Weight: 0x000000000000d431
  • Stake: 0x0000000139c33a499ce4c33a3b09cdd2cfa01ae70dbf2d18b2d7d168524440e55d55008800000007000001d1a94a2000000000000000000000000001000000013cb7d3842e8cee6a0ebd09f1fe884f6861e1b29c
  • RewardsOwner: 0x0000000b00000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715c
[
BaseTx <- 0x0000000e000030390000000000000000000000000000000000000000000000000000000000000006870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000700000000ee5be5c000000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715cdfafbdf5c81f635c9257824ff21c8e3e6f7b632ac306e11446ee540d34711a15000000016870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000500000000ee6b28000000000100000000
NodeID <- 0xe9094f73698002fd52c90819b457b9fbc866ab80
StarTime <- 0x000000005f21f31d
EndTime <- 0x000000005f497dc6
Weight <- 0x000000000000d431
Stake <- 0x0000000139c33a499ce4c33a3b09cdd2cfa01ae70dbf2d18b2d7d168524440e55d55008800000007000001d1a94a2000000000000000000000000001000000013cb7d3842e8cee6a0ebd09f1fe884f6861e1b29c
RewardsOwner <- 0x0000000b00000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715c
]
=
[
// base tx:
0x00, 0x00, 0x00, 0x0e, 0x00, 0x00, 0x30, 0x39,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x01,
0x68, 0x70, 0xb7, 0xd6, 0x6a, 0xc3, 0x25, 0x40,
0x31, 0x13, 0x79, 0xe5, 0xb5, 0xdb, 0xad, 0x28,
0xec, 0x7e, 0xb8, 0xdd, 0xbf, 0xc8, 0xf4, 0xd6,
0x72, 0x99, 0xeb, 0xb4, 0x84, 0x75, 0x90, 0x7a,
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
0xee, 0x5b, 0xe5, 0xc0, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x01, 0xda, 0x2b, 0xee, 0x01,
0xbe, 0x82, 0xec, 0xc0, 0x0c, 0x34, 0xf3, 0x61,
0xed, 0xa8, 0xeb, 0x30, 0xfb, 0x5a, 0x71, 0x5c,
0x00, 0x00, 0x00, 0x01,
0xdf, 0xaf, 0xbd, 0xf5, 0xc8, 0x1f, 0x63, 0x5c,
0x92, 0x57, 0x82, 0x4f, 0xf2, 0x1c, 0x8e, 0x3e,
0x6f, 0x7b, 0x63, 0x2a, 0xc3, 0x06, 0xe1, 0x14,
0x46, 0xee, 0x54, 0x0d, 0x34, 0x71, 0x1a, 0x15,
0x00, 0x00, 0x00, 0x01,
0x68, 0x70, 0xb7, 0xd6, 0x6a, 0xc3, 0x25, 0x40,
0x31, 0x13, 0x79, 0xe5, 0xb5, 0xdb, 0xad, 0x28,
0xec, 0x7e, 0xb8, 0xdd, 0xbf, 0xc8, 0xf4, 0xd6,
0x72, 0x99, 0xeb, 0xb4, 0x84, 0x75, 0x90, 0x7a,
0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
0xee, 0x6b, 0x28, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
// Node ID
0xe9, 0x09, 0x4f, 0x73, 0x69, 0x80, 0x02, 0xfd,
0x52, 0xc9, 0x08, 0x19, 0xb4, 0x57, 0xb9, 0xfb,
0xc8, 0x66, 0xab, 0x80,
// StartTime
0x00, 0x00, 0x00, 0x00, 0x5f, 0x21, 0xf3, 0x1d,
// EndTime
0x00, 0x00, 0x00, 0x00, 0x5f, 0x49, 0x7d, 0xc6,
// Weight
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
// Stake
0x00, 0x00, 0x00, 0x01, 0x39, 0xc3, 0x3a, 0x49,
0x9c, 0xe4, 0xc3, 0x3a, 0x3b, 0x09, 0xcd, 0xd2,
0xcf, 0xa0, 0x1a, 0xe7, 0x0d, 0xbf, 0x2d, 0x18,
0xb2, 0xd7, 0xd1, 0x68, 0x52, 0x44, 0x40, 0xe5,
0x5d, 0x55, 0x00, 0x88, 0x00, 0x00, 0x00, 0x07,
0x00, 0x00, 0x01, 0xd1, 0xa9, 0x4a, 0x20, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01,
0x3c, 0xb7, 0xd3, 0x84, 0x2e, 0x8c, 0xee, 0x6a,
0x0e, 0xbd, 0x09, 0xf1, 0xfe, 0x88, 0x4f, 0x68,
0x61, 0xe1, 0xb2, 0x9c,
// RewardsOwner
0x00, 0x00, 0x00, 0x0b, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x01, 0xda, 0x2b, 0xee, 0x01,
0xbe, 0x82, 0xec, 0xc0, 0x0c, 0x34, 0xf3, 0x61,
0xed, 0xa8, 0xeb, 0x30, 0xfb, 0x5a, 0x71, 0x5c,
]

Unsigned Create Chain Tx

What Unsigned Create Chain Tx Contains

An unsigned create chain tx contains a BaseTx, SubnetID, ChainName, VMID, FxIDs, GenesisData and SubnetAuth. The TypeID for this type is 0x0000000f.

  • BaseTx
  • SubnetID ID of the Subnet that validates this blockchain
  • ChainName A human readable name for the chain; need not be unique
  • VMID ID of the VM running on the new chain
  • FxIDs IDs of the feature extensions running on the new chain
  • GenesisData Byte representation of genesis state of the new chain
  • SubnetAuth Authorizes this blockchain to be added to this subnet

Gantt Unsigned Create Chain Tx Specification

+--------------+-------------+------------------------------------------+
| base_tx : BaseTx | size(base_tx) bytes |
+--------------+-------------+------------------------------------------+
| subnet_id : SubnetID | 32 bytes |
+--------------+-------------+------------------------------------------+
| chain_name : ChainName | 2 + len(chain_name) bytes |
+--------------+-------------+------------------------------------------+
| vm_id : VMID | 32 bytes |
+--------------+-------------+------------------------------------------+
| fx_ids : FxIDs | 4 + size(fx_ids) bytes |
+--------------+-------------+------------------------------------------+
| genesis_data : GenesisData | 4 + size(genesis_data) bytes |
+--------------+-------------+------------------------------------------+
| subnet_auth : SubnetAuth | size(subnet_auth) bytes |
+--------------+-------------+------------------------------------------+
| 74 + size(base_tx) + size(chain_name) + size(fx_ids) + |
| size(genesis_data) + size(subnet_auth) bytes |
+--------------+--------------------------------------------------------+

Proto Unsigned Create Chain Tx Specification

message CreateChainTx {
BaseTx base_tx = 1; // size(base_tx)
SubnetID subnet_id = 2; // 32 bytes
ChainName chain_name = 3; // 2 + len(chain_name) bytes
VMID vm_id = 4; // 32 bytes
FxIDs fx_ids = 5; // 4 + size(fx_ids) bytes
GenesisData genesis_data = 6 // 4 + size(genesis_data) bytes
SubnetAuth subnet_auth = 7; // size(subnet_auth) bytes
}

Unsigned Create Chain Tx Example

Let’s make an unsigned create chain tx that uses the inputs and outputs from the previous examples:

  • BaseTx: "Example BaseTx as defined above with ID set to 0f"
  • SubnetID: 24tZhrm8j8GCJRE9PomW8FaeqbgGS4UAQjJnqqn8pq5NwYSYV1
  • ChainName: EPIC AVM
  • VMID: avm
  • FxIDs: [secp256k1fx]
  • GenesisData: 11111DdZMhYXUZiFV9FNpfpTSQroysXhzWicG954YAKfkrk3bCEzLVY7gun1eAmAwMiQzVhtGpdR6dnPVcfhBE7brzkJ1r4wzi3dgA8G9Jwc4WpZ6Uh4Dr9aTdw7sFA5cpvCAVBsx6Xf3CB82jwH1gjPZ3WQnnCSKr2reoLtam6TfyYRra5xxXSkZcUm6BaJMW4fKzNP58uyExajPYKZvT5LrQ7MPJ9Fp7ebmYSzXg7YYauNARj
  • SubnetAuth: 0x0000000a0000000100000000
[
BaseTx <- 0x0000000f000030390000000000000000000000000000000000000000000000000000000000000006870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000700000000ee5be5c000000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715cdfafbdf5c81f635c9257824ff21c8e3e6f7b632ac306e11446ee540d34711a15000000016870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000500000000ee6b28000000000100000000
SubnetID <- 0x8c86d07cd60218661863e0116552dccd5bd84c564bd29d7181dbddd5ec616104
ChainName <- 0x455049432041564d
VMID <- 0x61766d0000000000000000000000000000000000000000000000000000000000
FxIDs <- 0x736563703235366b316678000000000000000000000000000000000000000000
GenesisData <- 0x000000000001000e4173736574416c6961735465737400000539000000000000000000000000000000000000000000000000000000000000000000000000000000000000001b66726f6d20736e6f77666c616b6520746f206176616c616e636865000a54657374204173736574000454455354000000000100000000000000010000000700000000000001fb000000000000000000000001000000013cb7d3842e8cee6a0ebd09f1fe884f6861e1b29c
SubnetAuth <- 0x0000000a0000000100000000
]
=
[
// base tx
0x00, 0x00, 0x00, 0x0f,
0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x39, 0xc3, 0x3a, 0x49, 0x9c, 0xe4, 0xc3, 0x3a,
0x3b, 0x09, 0xcd, 0xd2, 0xcf, 0xa0, 0x1a, 0xe7,
0x0d, 0xbf, 0x2d, 0x18, 0xb2, 0xd7, 0xd1, 0x68,
0x52, 0x44, 0x40, 0xe5, 0x5d, 0x55, 0x00, 0x88,
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x12, 0x30,
0x9c, 0xd5, 0xfd, 0xc0, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x01, 0x3c, 0xb7, 0xd3, 0x84,
0x2e, 0x8c, 0xee, 0x6a, 0x0e, 0xbd, 0x09, 0xf1,
0xfe, 0x88, 0x4f, 0x68, 0x61, 0xe1, 0xb2, 0x9c,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// end base tx

// subnet id
0x8c, 0x86, 0xd0, 0x7c, 0xd6, 0x02, 0x18, 0x66,
0x18, 0x63, 0xe0, 0x11, 0x65, 0x52, 0xdc, 0xcd,
0x5b, 0xd8, 0x4c, 0x56, 0x4b, 0xd2, 0x9d, 0x71,
0x81, 0xdb, 0xdd, 0xd5, 0xec, 0x61, 0x61, 0x04,

// chain name length
0x00, 0x08,

// chain name
0x45, 0x50, 0x49, 0x43, 0x20, 0x41, 0x56, 0x4d,

// vm id
0x61, 0x76, 0x6d, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,

// fxids
// num fxids
0x00, 0x00, 0x00, 0x01,
// fxid
0x73, 0x65, 0x63, 0x70, 0x32, 0x35, 0x36, 0x6b,
0x31, 0x66, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,

// genesis data len
0x00, 0x00, 0x00, 0xb0,
// genesis data
0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x0e,
0x41, 0x73, 0x73, 0x65, 0x74, 0x41, 0x6c, 0x69,
0x61, 0x73, 0x54, 0x65, 0x73, 0x74, 0x00, 0x00,
0x05, 0x39, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x1b, 0x66, 0x72,
0x6f, 0x6d, 0x20, 0x73, 0x6e, 0x6f, 0x77, 0x66,
0x6c, 0x61, 0x6b, 0x65, 0x20, 0x74, 0x6f, 0x20,
0x61, 0x76, 0x61, 0x6c, 0x61, 0x6e, 0x63, 0x68,
0x65, 0x00, 0x0a, 0x54, 0x65, 0x73, 0x74, 0x20,
0x41, 0x73, 0x73, 0x65, 0x74, 0x00, 0x04, 0x54,
0x45, 0x53, 0x54, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x01, 0xfb, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x01, 0x3c, 0xb7, 0xd3, 0x84,
0x2e, 0x8c, 0xee, 0x6a, 0x0e, 0xbd, 0x09, 0xf1,
0xfe, 0x88, 0x4f, 0x68, 0x61, 0xe1, 0xb2, 0x9c,

// type id (Subnet Auth)
0x00, 0x00, 0x00, 0x0a,
// num address indices
0x00, 0x00, 0x00, 0x01,
// address index
0x00, 0x00, 0x00, 0x00,
]

Unsigned Create Subnet Tx

What Unsigned Create Subnet Tx Contains

An unsigned create subnet tx contains a BaseTx, and RewardsOwner. The TypeID for this type is 0x00000010.

  • BaseTx
  • RewardsOwner A SECP256K1OutputOwners

Gantt Unsigned Create Subnet Tx Specification

+-----------------+-----------------------|---------------------------------+
| base_tx : BaseTx | size(base_tx) bytes |
+-----------------+-----------------------+--------------------------------+
| rewards_owner : SECP256K1OutputOwners | size(rewards_owner) bytes |
+-----------------+-----------------------+---------------------------------+
| size(rewards_owner) + size(base_tx) bytes |
+-------------------------------------------+

Proto Unsigned Create Subnet Tx Specification

message CreateSubnetTx {
BaseTx base_tx = 1; // size(base_tx)
SECP256K1OutputOwners rewards_owner = 2; // size(rewards_owner)
}

Unsigned Create Subnet Tx Example

Let’s make an unsigned create subnet tx that uses the inputs from the previous examples:

  • BaseTx: "Example BaseTx as defined above but with TypeID set to 16"
  • RewardsOwner:
    • TypeId: 11
    • Locktime: 0
    • Threshold: 1
    • Addresses: [ 0xda2bee01be82ecc00c34f361eda8eb30fb5a715c ]
[
BaseTx <- 0x00000010000030390000000000000000000000000000000000000000000000000000000000000006870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000700000000ee5be5c000000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715cdfafbdf5c81f635c9257824ff21c8e3e6f7b632ac306e11446ee540d34711a15000000016870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000500000000ee6b28000000000100000000
RewardsOwner <-
TypeID <- 0x0000000b
Locktime <- 0x0000000000000000
Threshold <- 0x00000001
Addresses <- [
0xda2bee01be82ecc00c34f361eda8eb30fb5a715c,
]
]
=
[
// base tx:
0x00, 0x00, 0x00, 0x10,
0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x39, 0xc3, 0x3a, 0x49, 0x9c, 0xe4, 0xc3, 0x3a,
0x3b, 0x09, 0xcd, 0xd2, 0xcf, 0xa0, 0x1a, 0xe7,
0x0d, 0xbf, 0x2d, 0x18, 0xb2, 0xd7, 0xd1, 0x68,
0x52, 0x44, 0x40, 0xe5, 0x5d, 0x55, 0x00, 0x88,
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x12, 0x30,
0x9c, 0xd5, 0xfd, 0xc0, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x01, 0x3c, 0xb7, 0xd3, 0x84,
0x2e, 0x8c, 0xee, 0x6a, 0x0e, 0xbd, 0x09, 0xf1,
0xfe, 0x88, 0x4f, 0x68, 0x61, 0xe1, 0xb2, 0x9c,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// RewardsOwner type id
0x00, 0x00, 0x00, 0x0b,
// locktime:
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// threshold:
0x00, 0x00, 0x00, 0x01,
// number of addresses:
0x00, 0x00, 0x00, 0x01,
// addrs[0]:
0xda, 0x2b, 0xee, 0x01,
0xbe, 0x82, 0xec, 0xc0, 0x0c, 0x34, 0xf3, 0x61,
0xed, 0xa8, 0xeb, 0x30, 0xfb, 0x5a, 0x71, 0x5c
]

Unsigned Import Tx

What Unsigned Import Tx Contains

An unsigned import tx contains a BaseTx, SourceChain, and Ins. The TypeID for this type is 0x00000011.

  • BaseTx
  • SourceChain is a 32-byte source blockchain ID.
  • Ins is a variable length array of Transferable Inputs.

Gantt Unsigned Import Tx Specification

+-----------------+--------------|---------------------------------+
| base_tx : BaseTx | size(base_tx) bytes |
+-----------------+--------------+---------------------------------+
| source_chain : [32]byte | 32 bytes |
+-----------------+--------------+---------------------------------+
| ins : []TransferIn | 4 + size(ins) bytes |
+-----------------+--------------+---------------------------------+
| 36 + size(ins) + size(base_tx) bytes |
+--------------------------------------+

Proto Unsigned Import Tx Specification

message ImportTx {
BaseTx base_tx = 1; // size(base_tx)
bytes source_chain = 2; // 32 bytes
repeated TransferIn ins = 3; // 4 bytes + size(ins)
}

Unsigned Import Tx Example

Let’s make an unsigned import tx that uses the inputs from the previous examples:

  • BaseTx: "Example BaseTx as defined above with TypeID set to 17"
  • SourceChain:
  • Ins: "Example SECP256K1 Transfer Input as defined above"
[
BaseTx <- 0x00000011000030390000000000000000000000000000000000000000000000000000000000000006870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000700000000ee5be5c000000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715cdfafbdf5c81f635c9257824ff21c8e3e6f7b632ac306e11446ee540d34711a15000000016870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000500000000ee6b28000000000100000000
SourceChain <- 0x787cd3243c002e9bf5bbbaea8a42a16c1a19cc105047c66996807cbf16acee10
Ins <- [
// input:
]
]
=
[
// base tx:
0x00, 0x00, 0x00, 0x11,
0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x39, 0xc3, 0x3a, 0x49, 0x9c, 0xe4, 0xc3, 0x3a,
0x3b, 0x09, 0xcd, 0xd2, 0xcf, 0xa0, 0x1a, 0xe7,
0x0d, 0xbf, 0x2d, 0x18, 0xb2, 0xd7, 0xd1, 0x68,
0x52, 0x44, 0x40, 0xe5, 0x5d, 0x55, 0x00, 0x88,
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x12, 0x30,
0x9c, 0xd5, 0xfd, 0xc0, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x01, 0x3c, 0xb7, 0xd3, 0x84,
0x2e, 0x8c, 0xee, 0x6a, 0x0e, 0xbd, 0x09, 0xf1,
0xfe, 0x88, 0x4f, 0x68, 0x61, 0xe1, 0xb2, 0x9c,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// sourceChain
0x78, 0x7c, 0xd3, 0x24, 0x3c, 0x00, 0x2e, 0x9b,
0xf5, 0xbb, 0xba, 0xea, 0x8a, 0x42, 0xa1, 0x6c,
0x1a, 0x19, 0xcc, 0x10, 0x50, 0x47, 0xc6, 0x69,
0x96, 0x80, 0x7c, 0xbf, 0x16, 0xac, 0xee, 0x10,
// input count:
0x00, 0x00, 0x00, 0x01,
// txID:
0xf1, 0xe1, 0xd1, 0xc1, 0xb1, 0xa1, 0x91, 0x81,
0x71, 0x61, 0x51, 0x41, 0x31, 0x21, 0x11, 0x01,
0xf0, 0xe0, 0xd0, 0xc0, 0xb0, 0xa0, 0x90, 0x80,
0x70, 0x60, 0x50, 0x40, 0x30, 0x20, 0x10, 0x00,
// utxoIndex:
0x00, 0x00, 0x00, 0x05,
// assetID:
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
// input:
0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
0xee, 0x6b, 0x28, 0x00, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00,
]

Unsigned Export Tx

What Unsigned Export Tx Contains

An unsigned export tx contains a BaseTx, DestinationChain, and Outs. The TypeID for this type is 0x00000012.

  • DestinationChain is the 32 byte ID of the chain where the funds are being exported to.
  • Outs is a variable length array of Transferable Outputs.

Gantt Unsigned Export Tx Specification

+-------------------+---------------+--------------------------------------+
| base_tx : BaseTx | size(base_tx) bytes |
+-------------------+---------------+--------------------------------------+
| destination_chain : [32]byte | 32 bytes |
+-------------------+---------------+--------------------------------------+
| outs : []TransferOut | 4 + size(outs) bytes |
+-------------------+---------------+--------------------------------------+
| 36 + size(outs) + size(base_tx) bytes |
+---------------------------------------+

Proto Unsigned Export Tx Specification

message ExportTx {
BaseTx base_tx = 1; // size(base_tx)
bytes destination_chain = 2; // 32 bytes
repeated TransferOut outs = 3; // 4 bytes + size(outs)
}

Unsigned Export Tx Example

Let’s make an unsigned export tx that uses the outputs from the previous examples:

  • BaseTx: "Example BaseTx as defined above" with TypeID set to 18
  • DestinationChain: 0x0000000000000000000000000000000000000000000000000000000000000000
  • Outs: "Example SECP256K1 Transfer Output as defined above"
[
BaseTx <- 0x00000012000030390000000000000000000000000000000000000000000000000000000000000006870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000700000000ee5be5c000000000000000000000000100000001da2bee01be82ecc00c34f361eda8eb30fb5a715cdfafbdf5c81f635c9257824ff21c8e3e6f7b632ac306e11446ee540d34711a15000000016870b7d66ac32540311379e5b5dbad28ec7eb8ddbfc8f4d67299ebb48475907a0000000500000000ee6b28000000000100000000
DestinationChain <- 0x0000000000000000000000000000000000000000000000000000000000000000
Outs <- [
000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859,
]
]
=
[
// base tx:
0x00, 0x00, 0x00, 0x12
0x00, 0x00, 0x00, 0x04, 0xff, 0xff, 0xff, 0xff,
0xee, 0xee, 0xee, 0xee, 0xdd, 0xdd, 0xdd, 0xdd,
0xcc, 0xcc, 0xcc, 0xcc, 0xbb, 0xbb, 0xbb, 0xbb,
0xaa, 0xaa, 0xaa, 0xaa, 0x99, 0x99, 0x99, 0x99,
0x88, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, 0x01,
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
0x43, 0xab, 0x08, 0x59, 0x00, 0x00, 0x00, 0x01,
0xf1, 0xe1, 0xd1, 0xc1, 0xb1, 0xa1, 0x91, 0x81,
0x71, 0x61, 0x51, 0x41, 0x31, 0x21, 0x11, 0x01,
0xf0, 0xe0, 0xd0, 0xc0, 0xb0, 0xa0, 0x90, 0x80,
0x70, 0x60, 0x50, 0x40, 0x30, 0x20, 0x10, 0x00,
0x00, 0x00, 0x00, 0x05, 0x00, 0x01, 0x02, 0x03,
0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
0x1c, 0x1d, 0x1e, 0x1f, 0x00, 0x00, 0x00, 0x05,
0x00, 0x00, 0x00, 0x00, 0x07, 0x5b, 0xcd, 0x15,
0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x07,
0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x04,
0x00, 0x01, 0x02, 0x03
// destination_chain:
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
// outs[] count:
0x00, 0x00, 0x00, 0x01,
// assetID:
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
// output:
0x00, 0x00, 0x00, 0x07,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x39,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02,
0x51, 0x02, 0x5c, 0x61, 0xfb, 0xcf, 0xc0, 0x78,
0xf6, 0x93, 0x34, 0xf8, 0x34, 0xbe, 0x6d, 0xd2,
0x6d, 0x55, 0xa9, 0x55, 0xc3, 0x34, 0x41, 0x28,
0xe0, 0x60, 0x12, 0x8e, 0xde, 0x35, 0x23, 0xa2,
0x4a, 0x46, 0x1c, 0x89, 0x43, 0xab, 0x08, 0x59,
]

Credentials

Credentials have one possible types: SECP256K1Credential. Each credential is paired with an Input or Operation. The order of the credentials match the order of the inputs or operations.

SECP256K1 Credential

A secp256k1 credential contains a list of 65-byte recoverable signatures.

What SECP256K1 Credential Contains

  • TypeID is the ID for this type. It is 0x00000009.
  • Signatures is an array of 65-byte recoverable signatures. The order of the signatures must match the input’s signature indices.

Gantt SECP256K1 Credential Specification

+------------------------------+---------------------------------+
| type_id : int | 4 bytes |
+-----------------+------------+---------------------------------+
| signatures : [][65]byte | 4 + 65 * len(signatures) bytes |
+-----------------+------------+---------------------------------+
| 8 + 65 * len(signatures) bytes |
+---------------------------------+

Proto SECP256K1 Credential Specification

message SECP256K1Credential {
uint32 TypeID = 1; // 4 bytes
repeated bytes signatures = 2; // 4 bytes + 65 bytes * len(signatures)
}

SECP256K1 Credential Example

Let’s make a payment input with:

  • signatures:
  • 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1e1d1f202122232425262728292a2b2c2e2d2f303132333435363738393a3b3c3d3e3f00
  • 0x404142434445464748494a4b4c4d4e4f505152535455565758595a5b5c5e5d5f606162636465666768696a6b6c6e6d6f707172737475767778797a7b7c7d7e7f00
[
Signatures <- [
0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1e1d1f202122232425262728292a2b2c2e2d2f303132333435363738393a3b3c3d3e3f00,
0x404142434445464748494a4b4c4d4e4f505152535455565758595a5b5c5e5d5f606162636465666768696a6b6c6e6d6f707172737475767778797a7b7c7d7e7f00,
]
]
=
[
// Type ID
0x00, 0x00, 0x00, 0x09,
// length:
0x00, 0x00, 0x00, 0x02,
// sig[0]
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1e, 0x1d, 0x1f,
0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2e, 0x2d, 0x2f,
0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
0x00,
// sig[1]
0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5e, 0x5d, 0x5f,
0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6e, 0x6d, 0x6f,
0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77,
0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f,
0x00,
]

Signed Transaction

A signed transaction is an unsigned transaction with the addition of an array of credentials.

What Signed Transaction Contains

A signed transaction contains a CodecID, UnsignedTx, and Credentials.

  • CodecID The only current valid codec id is 00 00.
  • UnsignedTx is an unsigned transaction, as described above.
  • Credentials is an array of credentials. Each credential will be paired with the input in the same index at this credential.

Gantt Signed Transaction Specification

+---------------------+--------------+------------------------------------------------+
| codec_id : uint16 | 2 bytes |
+---------------------+--------------+------------------------------------------------+
| unsigned_tx : UnsignedTx | size(unsigned_tx) bytes |
+---------------------+--------------+------------------------------------------------+
| credentials : []Credential | 4 + size(credentials) bytes |
+---------------------+--------------+------------------------------------------------+
| 6 + size(unsigned_tx) + len(credentials) bytes |
+------------------------------------------------+

Proto Signed Transaction Specification

message Tx {
uint32 codec_id = 1; // 2 bytes
UnsignedTx unsigned_tx = 2; // size(unsigned_tx)
repeated Credential credentials = 3; // 4 bytes + size(credentials)
}

Signed Transaction Example

Let’s make a signed transaction that uses the unsigned transaction and credential from the previous examples.

  • CodecID: 0
  • UnsignedTx: 0x0000000100000003ffffffffeeeeeeeeddddddddccccccccbbbbbbbbaaaaaaaa999999998888888800000001000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab085900000001f1e1d1c1b1a191817161514131211101f0e0d0c0b0a09080706050403020100000000005000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f0000000500000000075bcd150000000200000003000000070000000400010203
  • Credentials 0x0000000900000002000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1e1d1f202122232425262728292a2b2c2e2d2f303132333435363738393a3b3c3d3e3f00404142434445464748494a4b4c4d4e4f505152535455565758595a5b5c5e5d5f606162636465666768696a6b6c6e6d6f707172737475767778797a7b7c7d7e7f00
[
CodecID <- 0x0000
UnsignedTx <- 0x0000000100000003ffffffffeeeeeeeeddddddddccccccccbbbbbbbbaaaaaaaa999999998888888800000001000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab085900000001f1e1d1c1b1a191817161514131211101f0e0d0c0b0a09080706050403020100000000005000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f0000000500000000075bcd150000000200000003000000070000000400010203
Credentials <- [
0x0000000900000002000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1e1d1f202122232425262728292a2b2c2e2d2f303132333435363738393a3b3c3d3e3f00404142434445464748494a4b4c4d4e4f505152535455565758595a5b5c5e5d5f606162636465666768696a6b6c6e6d6f707172737475767778797a7b7c7d7e7f00,
]
]
=
[
// Codec ID
0x00, 0x00,
// unsigned transaction:
0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x03,
0xff, 0xff, 0xff, 0xff, 0xee, 0xee, 0xee, 0xee,
0xdd, 0xdd, 0xdd, 0xdd, 0xcc, 0xcc, 0xcc, 0xcc,
0xbb, 0xbb, 0xbb, 0xbb, 0xaa, 0xaa, 0xaa, 0xaa,
0x99, 0x99, 0x99, 0x99, 0x88, 0x88, 0x88, 0x88,
0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 0x02, 0x03,
0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
0x1c, 0x1d, 0x1e, 0x1f, 0x00, 0x00, 0x00, 0x07,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x39,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02,
0x51, 0x02, 0x5c, 0x61, 0xfb, 0xcf, 0xc0, 0x78,
0xf6, 0x93, 0x34, 0xf8, 0x34, 0xbe, 0x6d, 0xd2,
0x6d, 0x55, 0xa9, 0x55, 0xc3, 0x34, 0x41, 0x28,
0xe0, 0x60, 0x12, 0x8e, 0xde, 0x35, 0x23, 0xa2,
0x4a, 0x46, 0x1c, 0x89, 0x43, 0xab, 0x08, 0x59,
0x00, 0x00, 0x00, 0x01, 0xf1, 0xe1, 0xd1, 0xc1,
0xb1, 0xa1, 0x91, 0x81, 0x71, 0x61, 0x51, 0x41,
0x31, 0x21, 0x11, 0x01, 0xf0, 0xe0, 0xd0, 0xc0,
0xb0, 0xa0, 0x90, 0x80, 0x70, 0x60, 0x50, 0x40,
0x30, 0x20, 0x10, 0x00, 0x00, 0x00, 0x00, 0x05,
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
0x07, 0x5b, 0xcd, 0x15, 0x00, 0x00, 0x00, 0x02,
0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x07,
0x00, 0x00, 0x00, 0x04, 0x00, 0x01, 0x02, 0x03
// number of credentials:
0x00, 0x00, 0x00, 0x01,
// credential[0]:
0x00, 0x00, 0x00, 0x09, 0x00, 0x00, 0x00, 0x02,
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1e, 0x1d, 0x1f,
0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2e, 0x2d, 0x2f,
0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
0x00, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46,
0x47, 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e,
0x4f, 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56,
0x57, 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5e, 0x5d,
0x5f, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66,
0x67, 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6e, 0x6d,
0x6f, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76,
0x77, 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e,
0x7f, 0x00,

UTXO

A UTXO is a standalone representation of a transaction output.

What UTXO Contains

A UTXO contains a CodecID, TxID, UTXOIndex, and Output.

  • CodecID The only current valid codec id is 00 00.
  • TxID is a 32-byte transaction ID. Transaction IDs are calculated by taking sha256 of the bytes of the signed transaction.
  • UTXOIndex is an int that specifies which output in the transaction specified by TxID that this utxo was created by.
  • AssetID is a 32-byte array that defines which asset this utxo references.
  • Output is the output object that created this utxo. The serialization of Outputs was defined above.

Gantt UTXO Specification

+--------------+----------+-------------------------+
| codec_id : uint16 | 2 bytes |
+--------------+----------+-------------------------+
| tx_id : [32]byte | 32 bytes |
+--------------+----------+-------------------------+
| output_index : int | 4 bytes |
+--------------+----------+-------------------------+
| asset_id : [32]byte | 32 bytes |
+--------------+----------+-------------------------+
| output : Output | size(output) bytes |
+--------------+----------+-------------------------+
| 70 + size(output) bytes |
+-------------------------+

Proto UTXO Specification

message Utxo {
uint32 codec_id = 1; // 02 bytes
bytes tx_id = 2; // 32 bytes
uint32 output_index = 3; // 04 bytes
bytes asset_id = 4; // 32 bytes
Output output = 5; // size(output)
}

UTXO Example

Let’s make a UTXO from the signed transaction created above:

  • CodecID: 0
  • TxID: 0xf966750f438867c3c9828ddcdbe660e21ccdbb36a9276958f011ba472f75d4e7
  • UTXOIndex: 0x00000000
  • AssetID: 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
  • Output: "Example SECP256K1 Transferable Output as defined above"
[
CodecID <- 0x0000
TxID <- 0xf966750f438867c3c9828ddcdbe660e21ccdbb36a9276958f011ba472f75d4e7
UTXOIndex <- 0x00000000
AssetID <- 0x000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
Output <- 0x000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859
]
=
[
// Codec ID:
0x00, 0x00,
// txID:
0xf9, 0x66, 0x75, 0x0f, 0x43, 0x88, 0x67, 0xc3,
0xc9, 0x82, 0x8d, 0xdc, 0xdb, 0xe6, 0x60, 0xe2,
0x1c, 0xcd, 0xbb, 0x36, 0xa9, 0x27, 0x69, 0x58,
0xf0, 0x11, 0xba, 0x47, 0x2f, 0x75, 0xd4, 0xe7,
// utxo index:
0x00, 0x00, 0x00, 0x00,
// assetID:
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
// output:
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x02, 0x00, 0x01, 0x02, 0x03,
0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13,
0x14, 0x15, 0x16, 0x17, 0x18, 0x19, 0x1a, 0x1b,
0x1c, 0x1d, 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23,
0x24, 0x25, 0x26, 0x27,
]

StakeableLockIn

A StakeableLockIn is a staked and locked input. The StakeableLockIn can only fund StakeableLockOuts with the same address until its locktime has passed.

What StakeableLockIn Contains

A StakeableLockIn contains a TypeID, Locktime and TransferableIn.

  • TypeID is the ID for this output type. It is 0x00000015.
  • Locktime is a long that contains the unix timestamp before which the input can be consumed only to stake. The unix timestamp is specific to the second.
  • TransferableIn is a transferable input object.

Gantt StakeableLockIn Specification

+-----------------+-------------------+--------------------------------+
| type_id : int | 4 bytes |
+-----------------+-------------------+--------------------------------+
| locktime : long | 8 bytes |
+-----------------+-------------------+--------------------------------+
| transferable_in : TransferableInput | size(transferable_in) |
+-----------------+-------------------+--------------------------------+
| 12 + size(transferable_in) bytes |
+----------------------------------+

Proto StakeableLockIn Specification

message StakeableLockIn {
uint32 type_id = 1; // 04 bytes
uint64 locktime = 2; // 08 bytes
TransferableInput transferable_in = 3; // size(transferable_in)
}

StakeableLockIn Example

Let’s make a StakeableLockIn with:

  • TypeID: 21
  • Locktime: 54321
  • TransferableIn: "Example SECP256K1 Transfer Input as defined above"
[
TypeID <- 0x00000015
Locktime <- 0x000000000000d431
TransferableIn <- [
f1e1d1c1b1a191817161514131211101f0e0d0c0b0a09080706050403020100000000005000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f0000000500000000075bcd150000000100000000,
]
]
=
[
// type_id:
0x00, 0x00, 0x00, 0x15,
// locktime:
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
// transferable_in
0xf1, 0xe1, 0xd1, 0xc1, 0xb1, 0xa1, 0x91, 0x81,
0x71, 0x61, 0x51, 0x41, 0x31, 0x21, 0x11, 0x01,
0xf0, 0xe0, 0xd0, 0xc0, 0xb0, 0xa0, 0x90, 0x80,
0x70, 0x60, 0x50, 0x40, 0x30, 0x20, 0x10, 0x00,
0x00, 0x00, 0x00, 0x05,
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00,
0x07, 0x5b, 0xcd, 0x15, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x00,
]

StakeableLockOut

A StakeableLockOut is an output that is locked until its locktime, but can be staked in the meantime.

What StakeableLockOut Contains

A StakeableLockOut contains a TypeID, Locktime and TransferableOut.

  • TypeID is the ID for this output type. It is 0x00000016.
  • Locktime is a long that contains the unix timestamp before which the output can be consumed only to stake. The unix timestamp is specific to the second.
  • transferableout: "Example SECP256K1 Transfer Output as defined above"

Gantt StakeableLockOut Specification

+------------------+--------------------+--------------------------------+
| type_id : int | 4 bytes |
+------------------+--------------------+--------------------------------+
| locktime : long | 8 bytes |
+------------------+--------------------+--------------------------------+
| transferable_out : TransferableOutput | size(transferable_out) |
+------------------+--------------------+--------------------------------+
| 12 + size(transferable_out) bytes |
+-----------------------------------+

Proto StakeableLockOut Specification

message StakeableLockOut {
uint32 type_id = 1; // 04 bytes
uint64 locktime = 2; // 08 bytes
TransferableOutput transferable_out = 3; // size(transferable_out)
}

StakeableLockOut Example

Let’s make a stakeablelockout with:

  • TypeID: 22
  • Locktime: 54321
  • TransferableOutput: "Example SECP256K1 Transfer Output from above"
[
TypeID <- 0x00000016
Locktime <- 0x000000000000d431
TransferableOutput <- 0x000000070000000000003039000000000000d431000000010000000251025c61fbcfc078f69334f834be6dd26d55a955c3344128e060128ede3523a24a461c8943ab0859,
]
=
[
// type_id:
0x00, 0x00, 0x00, 0x16,
// locktime:
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd4, 0x31,
// transferable_out
0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x30, 0x39, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0xd4, 0x31, 0x00, 0x00, 0x00, 0x01,
0x00, 0x00, 0x00, 0x02, 0x51, 0x02, 0x5c, 0x61,
0xfb, 0xcf, 0xc0, 0x78, 0xf6, 0x93, 0x34, 0xf8,
0x34, 0xbe, 0x6d, 0xd2, 0x6d, 0x55, 0xa9, 0x55,
0xc3, 0x34, 0x41, 0x28, 0xe0, 0x60, 0x12, 0x8e,
0xde, 0x35, 0x23, 0xa2, 0x4a, 0x46, 0x1c, 0x89,
0x43, 0xab, 0x08, 0x59,
]

Subnet Auth

What Subnet Auth Contains

Specifies the addresses whose signatures will be provided to demonstrate that the owners of a subnet approve something.

  • TypeID is the ID for this type. It is 0x0000000a.
  • AddressIndices defines which addresses' signatures will be attached to this transaction. AddressIndices[i] is the index in a subnet owner list that corresponds to the signature at index i in the signature list. Must be sorted low to high and not have duplicates.

Gantt Subnet Auth Specification

+-----------------+------------------+-------------------------------------+
| type_id : int | 4 bytes |
+-----------------+------------------+-------------------------------------+
| address_indices : []int | 4 + 4*len(address_indices) bytes |
+-----------------+------------------+-------------------------------------+
| 8 + 4*len(address_indices) bytes |
+-----------------+--------------------------------------------------------+

Proto Subnet Auth Specification

message SubnetAuth {
uint32 type_id = 1; // 04 bytes
repeated AddressIndex address_indices = 2; // 04 + 4*len(address_indices) bytes
}

Subnet Auth Example

Let’s make a subnet auth:

  • TypeID: 10
  • AddressIndices: [0]
[
TypeID <- 0x0000000a
AddressIndices <- [
0x00000000
]
]

=
[
// type id
0x00, 0x00, 00x0, 0x0a,

// num address indices
0x00, 0x00, 0x00, 0x01,

// address index 1
0x00, 0x00, 0x00, 0x00
]